Cisco Cisco Packet Data Interworking Function (PDIF)
PDSN Service Configuration Mode Commands
simple-ip allow ▀
Command Line Interface Reference, StarOS Release 17 ▄
7897
simple-ip allow
Enables or disables Simple-IP sessions from making a connection before authorization takes place.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdsn-service)#
Syntax
[no | default ] simple-ip allow
no
When a session attempts PPP authentication, it is assumed that it is a Simple-IP session and it is disconnected
before the user is authenticated (RADIUS or local authentication). Also, if
before the user is authenticated (RADIUS or local authentication). Also, if
allow-noauth
is enabled and
PPP authentication is not performed, after IPCP the session is disconnected if it is discovered that it is a
Simple-IP session.
Simple-IP session.
default
Reset this command to allow Simple-IP sessions to connect.
Usage
Use this command to prevent Simple-IP sessions from connecting to a PDSN service.
Example
The following command configures the PDSN service so that it will reject any Simple-IP sessions:
nosimple-ip allow
The following command configures the PDSN service to allow Simple-IP sessions:
simple-ip allow