Cisco Cisco Packet Data Interworking Function (PDIF)
Radio Congestion Policy Configuration Mode Commands
sampling-interval ▀
Command Line Interface Reference, StarOS Release 17 ▄
8103
sampling-interval
Configures the sampling interval.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec > ACS Configuration > Radio Congestion Policy Configuration
active-charging service service_name > radio-congestion policy policy_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-radio-congestion-policy)#
Syntax
sampling-interval sampling_interval
default sampling-interval
default
Configures this command with its default setting.
Default: 5 seconds
Default: 5 seconds
sampling_interval
Specifies the sampling interval, in seconds.
sampling_interval
must be a number from 2 to 60.
Usage
Use this command to configure the sampling interval. This indicates the interval in seconds at which various
TCP parameters are captured to determine the congestion level.
TCP parameters are captured to determine the congestion level.
Example
The following command specifies a sampling interval of
20
seconds:
sampling-interval 20