Cisco Cisco Packet Data Interworking Function (PDIF)
Remote Secret List Configuration Mode Commands
▀ remote-id
▄ Command Line Interface Reference, StarOS Release 17
8118
remote-id
Configures the remote pre-shared key based on the ID type.
Product
WSG
Privilege
Security Administrator
Mode
Exec > Global Configuration > Remote Secret List Configuration
> crypto remote-secret-list listname
[local_context]host_name(config-remote-server-list)#
Syntax
remote-id id-type { der-asn1-dn | fqdn | ip-addr | key-id | rfc822-addr } id id_value
secret [ encrypted ] key key_value
secret [ encrypted ] key key_value
no remote-id id-type { der-asn1-dn | fqdn | ip-addr | key-id | rfc822-addr } id id_value
no
Removes the specified ID from the remote secret list.
id-type { der-asn1-dn | fqdn | ip-addr | key-id | rfc822-addr }
Configures the NAI IDr type parameter. If no id-type is specified, then
rfc822-addr
is assumed.
der-asn1-dn
: configures NAI Type DER_ASN1_DN (Distinguished Encoding Rules, ASN.1
encoding, Distinguished Name)
fqdn
: configures NAI Type ID_FQDN (Internet Fully Qualified Domain Name).
ip-addr
: configures NAI Type ID_IP_ADDR (IP Address).
key-id
: configures NAI Type ID_KEY_ID (opaque octet string).
rfc822-addr
: configures NAI Type ID_RFC822_ADDR (RFC 822 email address).
secret [ encrypted ] key
key_value
Specifies the use of an encrypted or plain text secret key.
key_value
is an alphanumeric string of 1 through
255 bytes or a hexadecimal string of 16 to 444 bytes.
Usage
Use this command to enter up to 1000 entries in the remote secret list. Each entry is designated by ID type
and ID value. Repeat the command sequence to add entries to the list.
and ID value. Repeat the command sequence to add entries to the list.
Example
The following command enters an ip address in the remote secret list: