Cisco Cisco Packet Data Interworking Function (PDIF)
SCCP Network Configuration Mode Commands
timeout ▀
Command Line Interface Reference, StarOS Release 17 ▄
8321
timeout
This command configures the timeout parameters for this SCCP network.
Product
SGSN
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SCCP Network Configuration
configure > sccp-network id_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-sccp-network-sccp_id)#
Syntax
timeout { attack-timer | congestion-timer | conn-est-timer | crd-timer | decay-timer |
iar-timer | ias-timer | interval-timer | reassembly-timer | release-timer | repeat-
release-timer | reset-timer | sst-timer } +
iar-timer | ias-timer | interval-timer | reassembly-timer | release-timer | repeat-
release-timer | reset-timer | sst-timer } +
default timeout
no timeout timer
attack-timer time
Defines the time before the attack timer expires.
time:
enter an integer between 1 and 10.
congestion-timer time
Defines the time before the congestion timer expires.
time:
enter an integer between 1 and 10.
conn-est-timer
time
Defines the time before the connection timer expires.
time:
enter an integer between 6 and 12.
crd-timer time
Defines the time before the coordinated-state-change timer expires.
time:
enter an integer between 60 and 120.
decay-timer time
Defines the time before the decay timer expires.
time:
enter an integer between 1 and 10.