Cisco Cisco Packet Data Interworking Function (PDIF)
Service Redundancy Protocol Configuration Mode Commands
▀ route-modifier
▄ Command Line Interface Reference, StarOS Release 17
8380
route-modifier
Sets the route modifier for the peer chassis.
Product
All products supporting ICSR
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Service Redundancy Protocol Configuration
configure > context context_name > service-redundancy-protocol
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-srp)#
Syntax
route-modifier threshold threshold_value
default route-modifier
default
Resets the route modifier to the default setting of 16.
threshold_value
Specifies the value that causes the route-modifier counter to be reset to the initial value.
threshold_value
must be an integer from 2 through 32. Default = 16.
Usage
This command is used to determine when the route modifier should be reset to its initial value to avoid
rollover.
rollover.
Example
The following example sets the route modifier threshold to
10
:
route-modifier threshold 10