Cisco Cisco Packet Data Interworking Function (PDIF)
SGSN Global Configuration Mode Commands
▀ aggregate-ipc-msg
▄ Command Line Interface Reference, StarOS Release 17
8424
aggregate-ipc-msg
Configures the number of inter-process communication (IPC) messages that can be aggregated in the various managers
and defines the frequency of flushing the messages.
and defines the frequency of flushing the messages.
Product
SGSN
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SGSN Global Configuration
configure > sgsn-global
Entering the above command sequence results in the following prompt:
[local]host_name(config-sgsn-global)#
Syntax
aggregate-ipc-msg { gbmgr | linkmgr | sessmgr } { auto-num-msgs | flush-
frequencyfrequency | num-msgs number_msgs }
frequencyfrequency | num-msgs number_msgs }
default aggregate-ipc-msg { gbmgr | linkmgr | sessmgr }
default
Resets the managers to default values for flushing.
gbmgr
Selects the Gb manager to configure the number of IPC messages to be aggregated and frequency of flushing
messages to the Session Manager that have been aggregated at the Gb Manager.
messages to the Session Manager that have been aggregated at the Gb Manager.
linkmgr
Selects the linkmgr to configure the number of IPC messages to be aggregated and frequency of flushing.
sessmgr
Selects the sessmgr to configure the number of IPC messages to be aggregated and frequency of flushing.
auto-num-msgs
Enables the automated aggregation of messages sent from LinkMgr or GbMgr to the SessMgr.
Default is Disabled.
Default is Disabled.
flush-frequency frequency
Configure the frequency, in 100-millisecond intervals, that the aggregated IPC messages will be flushed.
Flushing limits the number of messenger calls between managers to transfer the received packets.
Flushing limits the number of messenger calls between managers to transfer the received packets.
frequency
: Enter an integer from 1 to 3. Default is 1.