Cisco Cisco Packet Data Interworking Function (PDIF)
SGSN Global Configuration Mode Commands
dscp-template ▀
Command Line Interface Reference, StarOS Release 17 ▄
8437
dscp-template
Creates and/or deletes DSCP templates that can be configured for use for all GPRS services on the SGSN and provides
access to the DSCP Template configuration mode. This command is also supported on HNB-GW service to create a
DSCP template.
access to the DSCP Template configuration mode. This command is also supported on HNB-GW service to create a
DSCP template.
Product
SGSN
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SGSN Global Configuration
configure > sgsn-global
Entering the above command sequence results in the following prompt:
[local]host_name(config-sgsn-global)#
Syntax
dscp-template template_name [ -noconfirm ]
no dscp-template template_name
no
Deletes the template instance from the SGSN Global configuration.
template_name
Enter 1 to 64 alphanumeric characters, including dots (.), dashes (-), and forward slashes (/). to identify a
unique instance of a DSCP template.
There is no known limit to the number of templates that can be created.
unique instance of a DSCP template.
There is no known limit to the number of templates that can be created.
Usage
This command enables the operator to create or delete an instance of a DSCP template and access the DSCP
Template configuration mode. The DSCP templates are used to define the DSCP configuration for control
packets and data packets for the GPRS services.
Related commands:
Template configuration mode. The DSCP templates are used to define the DSCP configuration for control
packets and data packets for the GPRS services.
Related commands:
This command provides access to the mode containing all the configuration commands used to define
DSCP markings for the control packets and data packets for a particular GPRS service (see the
DSCP Template Configuration Mode Commands section).
DSCP Template Configuration Mode Commands section).
To associated a specific DSCP template with a specific GPRS service configuration, for builds prior to
release 14.0 use the
associate-dscp-template downlink
command and for builds in releases
14.0 and higher use the
associate dscp-template downlink
command. Both commands are
documented in the GPRS Service Configuration Mode Commands section.
To check the list of DSCP templates configured, use the
show sgsn-mode
command documented in
the Exec Mode Commands section.