Cisco Cisco Packet Data Interworking Function (PDIF)
SGSN Service Configuration Mode Commands
▀ admin-disconnect-behavior
▄ Command Line Interface Reference, StarOS Release 17
8518
admin-disconnect-behavior
This command defines some of the actions the SGSN will take during an Admin-Disconnect procedure.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > SGSN Service Configuration
configure > context context_name > sgsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgsn-service)#
Syntax
admin-disconnect-behavior { clear-subscription | detach-type { reattach-not-required |
reattach-required } }
reattach-required } }
[ default | no ] admin-disconnect-behavior { clear-subscription | detach-type }
clear-subscription
Including this keyword in the configuration instructs the SGSN to clear subscriber contexts and the
subscription data database whenever the
subscription data database whenever the
clear subscribers all
command is issued (from the Exec
mode) for attached subscribers. As well, the SGSN will issue an appropriate Map-Purge-MS-Req to the HLR
if needed.
Default: disabled
if needed.
Default: disabled
detach-type
Including this keyword defines which type of detach instruction to include in the Detach-Request message
during an Admin-Disconnect procedure. One of the following options must be included when this command
is entered:
during an Admin-Disconnect procedure. One of the following options must be included when this command
is entered:
reattach-not-required
reattach-required
Default: reattach-required
default | no
Including either
default
or
no
keyword in the command, instructs the SGSN to use the default value for the
specified parameter.
Usage
Include the
clear-subscription
keyword with this command configuration to ensure that more than
attached MM-context and active PDP-contexts are cleared when the clear
subscribers all
command is
issued for attached subscribers.