Cisco Cisco Packet Data Interworking Function (PDIF)
S-GW Service Configuration Mode Commands
▀ mag-service
▄ Command Line Interface Reference, StarOS Release 17
8620
mag-service
Identifies the Mobile Access Gateway (MAG) egress service through which calls are to be routed for this S-GW service.
Product
S-GW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > S-GW Service Configuration
configure > context context_name > sgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgw-service)#
Syntax
mag-service egress service name
no mag-service egress service
no
Removes the configured MAG egress service from this service.
egress service name
Specifies the MAG service name to be used as the egress MAG service on a Proxy Mobile IPv6 (PMIP)
based S5/S8 interface.
based S5/S8 interface.
name
must be an existing MAG service expressed as an alphanumeric string of 1 through 63 characters.
Usage
Use this command to specify the name of the MAG service where calls are to be routed.
Example
The following command specifies that an existing MAG service named
mag3
is to be used to route call
through for this S-GW service:
mag-service egress service mag3