Cisco Cisco Packet Data Interworking Function (PDIF)
SSH Configuration Mode Commands
▀ listen
▄ Command Line Interface Reference, StarOS Release 17
8674
listen
Configures the SSH server in the current context to only listen for connections from the interface with the specified IP
address. The default behavior is to listen on all interfaces.
address. The default behavior is to listen on all interfaces.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > SSH Configuration
configure > context context_name > server sshd
Entering the above command sequence results in the following prompt:
[local]host_name(config-sshd)#
Syntax
listen ip_address
no listen
no
Disable listening for a specific interface address and enable listening on all interfaces.
ip_address
Enables listening only on the interface with the specified IP address.
ip_address
must be entered using
IPv4 dotted-decimal notation.
Usage
Use this command to configure the SSH server for the current context to only listen for connections from the
interface with the specified IP address. Only one IP address may be set for listening.
interface with the specified IP address. Only one IP address may be set for listening.
Example
The following command specifies that the Server should only listen for connections in the interface with the
IP address of
IP address of
192.168.0.10
:
listen 192.168.0.10