Cisco Cisco Packet Data Interworking Function (PDIF)
Subscriber Configuration Mode Commands
active-charging bandwidth-policy ▀
Command Line Interface Reference, StarOS Release 17 ▄
8685
active-charging bandwidth-policy
Configures the bandwidth policy to be used for the subscriber.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
active-charging bandwidth-policy bandwidth_policy_name
{ default | no } active-charging bandwidth-policy
default
Specifies that the default bandwidth policy configured in the rulebase be used for this subscriber.
no
Disables bandwidth control for this subscriber.
active-charging bandwidth-policy
bandwidth_policy_name
Specifies name of the bandwidth policy.
bandwidth_policy_name
must be an alphanumeric string of 1 through 63 characters.
Usage
Use this command to configure bandwidth policy to be used for subscribers.
Example
The following command configures a bandwidth policy named
standard
for the subscriber:
active-charging bandwidth-policy standard