Cisco Cisco Packet Data Interworking Function (PDIF)
Subscriber Configuration Mode Commands
dhcp service ▀
Command Line Interface Reference, StarOS Release 17 ▄
8723
dhcp service
Enables DHCP service configuration accessible to the Se-GW context for subscriber. The specified DHCP service will
be used for performing DHCP procedures between HNB-GW and HMS.
be used for performing DHCP procedures between HNB-GW and HMS.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
dhcp service dhcp_svc_name context ctxt_name
no dhcp service
no
Removes the specified DHCP service from the subscriber template configuration.
dhcp_svc_name
Specifies name of the DHCP service configured in Context configuration mode for DHCP proxy support on
HNB-GW.
HNB-GW.
dhcp_svc_name
must be an alphanumeric string of 1 through 63 characters preconfigured within the same
context of this subscriber.
context ctxt_name
Specifies the name of the context where DHCP service is configured for HNB-GW subscribers.
ctxt_name
must be an alphanumeric string of 1 trough 79 characters.
Usage
This command associates the subscriber template with pre-configured DHCP service configuration to provide
accessibility to Se-GW with HNB-GW.
accessibility to Se-GW with HNB-GW.
Example
Following command applies a previously configured DHCP service named
dhcp_hnb1
to a subscriber
template within the context named
femto_hnb
.
dhcp service dhcp_hnb1 context femto_hnb