Cisco Cisco Packet Data Interworking Function (PDIF)
Subscriber Configuration Mode Commands
nexthop-forwarding-address ▀
Command Line Interface Reference, StarOS Release 17 ▄
8793
nexthop-forwarding-address
Configures the next hop forwarding address for the subscriber.
Product
PDSN
GGSN
ASN-GW
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
nexthop-forwarding-address ip_address
no nexthop-forwarding-address
nexthop-forwarding-address
ip_address
Configures the IP address of the nexthop forwarding address.
ip_address
must be entered using IPv4
dotted-decimal or IPv6 colon-separated-hexadecimal notation.
no
Disables this function. This is the default setting.
Usage
Use this command to configure the next hop forwarding address for the subscriber.
Example
The following command configures the next hop forwarding address to
10.1.1.1
(IPv4):
nexthop-forwarding-address 10.1.1.1