Cisco Cisco Packet Data Interworking Function (PDIF)
Subscriber Configuration Mode Commands
▀ nw-reachability-server
▄ Command Line Interface Reference, StarOS Release 17
8796
nw-reachability-server
Binds the name of a configured network reachability server to the current subscriber and enables network reachability
detection.
detection.
Product
HA
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
nw-reachability server server_name
no nw-reachability server
nw-reachability server
server_name
Specifies the name of a network reachability server that has been defined in the current context.
server_name
is an alphanumeric string of 1 through 16 characters.
no nw-reachability
server
Deletes the name of the network reachability server from the current subscribers configuration and disable
network reachability failure detection for the current subscriber.
network reachability failure detection for the current subscriber.
Usage
Use this command to define the network reachability server for the current subscriber and enable network
reachability failure detection for the current subscriber. If a network reachability server is defined in an IP
pool, that setting takes precedence over this command.
reachability failure detection for the current subscriber. If a network reachability server is defined in an IP
pool, that setting takes precedence over this command.
Important:
Refer to the HA configuration mode command
policy nw-reachability-fail
to configure the
action that should be taken when network reachability fails.
Important:
Refer to the context configuration mode command
nw-reachability server
to configure
network reachability servers.
Important:
Refer to the
nw-reachability server server_name
keyword of the
ip pool
command in the
Context Configuration Mode Commands chapter to bind the network reachability server to an IP pool.
Example