Cisco Cisco Packet Data Interworking Function (PDIF)
Subscriber Configuration Mode Commands
▀ timeout long-duration
▄ Command Line Interface Reference, StarOS Release 17
8842
timeout long-duration
Configures the long duration timeout and optionally the inactivity duration of HA subscriber session.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
timeout long-duration ldt_timeout [ inactivity-time inact_timeout ]
[ no | default ]timeout long-duration
no
Indicates the timeout specified is to be returned to its default behavior. If no specific
timeout is specified then all are set to their default behavior.
timeout is specified then all are set to their default behavior.
long-duration
ldt_timeout
Default: 0
Designates the maximum duration of the session (in seconds) before the system automatically
reports/terminates the session.
Designates the maximum duration of the session (in seconds) before the system automatically
reports/terminates the session.
ldt_timeout
must be a value in the range from 0 through 4294967295. The special value 0 disables the
timer.
inactivity-time
inact_timeout
Specifies the maximum amount of time (in seconds) before the specified session is marked as dormant.
inact_timeout
must be a value in the range from 0 through 4294967295. The special value 0 disables the
inactivity time specified.
Usage
Use this command to set the long duration timeout period and inactivity timer for subscriber sessions. Reduce
the idle timeout to free session resources faster for use by new requests.
Refer to the
the idle timeout to free session resources faster for use by new requests.
Refer to the
long-duration-action detection
and
long-duration-action disconnection
commands for more information.
Example
The following command sets the long duration timeout duration to
300
seconds and inactivity timer for
subscriber session to
45
seconds: