Cisco Cisco Packet Data Interworking Function (PDIF)
TACACS+ Configuration Mode Commands
▀ on-network-error
▄ Command Line Interface Reference, StarOS Release 17
8858
on-network-error
Configures StarOS behavior when a TACACS+ login fails due to a network error. This command also can be used to
configure system behavior separately for TACACS+ network error login failures for administrative users accessing the
system via the Console port.
configure system behavior separately for TACACS+ network error login failures for administrative users accessing the
system via the Console port.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > TACACS+ Configuration
configure > tacacs mode
Entering the above command sequence results in the following prompt:
[local]host_name(config-tacacs)#
Syntax
on-network-error { continue | stop } [ tty console ]
continue
The system will continue with authentication using non-TACACS+ authentication services.
stop
The system forces the failed TACACS+ user to exit.
tty console
Release 12 and later systems only: Can be used after the
continue
or
stop
options to specify system
behavior for TACACS+ CLI users being authenticated via the StarOS Console port:
stop tty console
: Forces the failed user to exit when authentication fails.
continue tty console
: The system will continue with authentication using non-TACACS+
authentication services.
Usage
Use this command to configure system behavior for users who fail TACACS+ authentication due to a
network error.
network error.
Example
The following command conifgures the system to stop when a TACACS+ login fails due to a network error:
on-network-error stop