Cisco Cisco Packet Data Interworking Function (PDIF)
Traffic Policy-Map Configuration Mode Commands
qos user-datagram dscp-marking ▀
Command Line Interface Reference, StarOS Release 17 ▄
8899
qos user-datagram dscp-marking
Enables and configures Quality of Service (QoS) policy related to differentiated service code point (DSCP) marking in
the user datagrams of subscriber session flows on a per-flow basis.
the user datagrams of subscriber session flows on a per-flow basis.
Product
ASN-GW
HA
HSGW
PDSN
P-GW
SAEGW
SCM
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Traffic Policy Map Configuration
configure > context context_name > policy-map name map_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-policy-map)#
Syntax
qos user-datagram dscp-marking dscp_code
no qos user-datagram dscp-marking
dscp_code
Specifies the use of the DSCP code value marked in the IP header of packet/flow to determine the QoS for
traffic policing.
traffic policing.
dscp_code
must be expressed as a hexadecimal number from 0x00 through 0x3F.
Usage
Use this command to apply the QoS policy to subscriber session flow by DSCP marking in user datagram.
Example
The following command sets DSCP marking for user datagram as
0x01
for QoS to subscriber session flow:
qos user-datagram dscp-marking 0x01