Cisco Cisco Packet Data Interworking Function (PDIF)
TWAN Profile Configuration Mode Commands
▀ dictionary
▄ Command Line Interface Reference, StarOS Release 17
8928
dictionary
Configure the dictionary to be used to forward the permanent identity of the subscriber to the AAA server.
Product
SaMOG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > TWAN Profile Configuration
configure > context context_name > twan-profile twan_profile_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-twan-profile)#
Syntax
dictionary { custom70 | custom71 }
default dictionary
default
Configures the dictionary to its default value.
Default: custom70
Default: custom70
Usage
Use this command to configure the dictionary to forward the permanent identity of the subscriber to the AAA
server. The dictionary configuration at the TWAN profile level will be applied to all the RADIUS clients
under that TWAN profile.
Configure the custom71 dictionary when Cisco WLC is used with PMIPv6 as the access-type. Configuring
the custom71 dictionary enables attributes like the UE’s permanent identity (NAI), subscribed APN, network
protocol (PMIPv6), and LMA address (CGW service’s bind address) to be sent in the Cisco Vendor-specific
attributes to WLC. The WLC uses this information to build the PMIPv6 PBU to the SaMOG gateway when
the
server. The dictionary configuration at the TWAN profile level will be applied to all the RADIUS clients
under that TWAN profile.
Configure the custom71 dictionary when Cisco WLC is used with PMIPv6 as the access-type. Configuring
the custom71 dictionary enables attributes like the UE’s permanent identity (NAI), subscribed APN, network
protocol (PMIPv6), and LMA address (CGW service’s bind address) to be sent in the Cisco Vendor-specific
attributes to WLC. The WLC uses this information to build the PMIPv6 PBU to the SaMOG gateway when
the
aaa-override
option is enabled on the Cisco WLC. These attributes are not sent when the custom70
dictionary is configured.
To configure the dictionary to use for individual RADIUS clients, use the
To configure the dictionary to use for individual RADIUS clients, use the
dictionary
keyword in the
radius client
command under the TWAN Profile Configuration Mode.
Example
The following command configures the TWAN profile to use custom71 dictionary:
dictionary custom71