Cisco Cisco Packet Data Gateway (PDG)
ALCAP Configuration Mode Commands
▀ aal2-node
▄ Command Line Interface Reference, StarOS Release 16
1240
aal2-node
Thsi command creates/configures AAL2 node configuration to defined AAL2 node properties for IuCS-over-ATM
fucntion.
fucntion.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > ALCAP Service Configuration
configure > context context_name > alcap-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-alcap-service-service_name)#
Syntax
aal2-node aal2_node_name [-noconfirm]
no aal2-node aal2_ndoe_name
no
Removes the configured AAL2 node from ALCAP service configuration.
aal2_node_name
Identifies the name of the AAL2 node name to configure the AAL2 node paramters.
The
The
aal2_node_name
must be an alphanumerical string from 1 through 63 characters.
Usage
Use this command to create/configure the AAL2 node configuration and switch to AAL2 Node Configuration
mode.
Entering this command results in the following prompt:
mode.
Entering this command results in the following prompt:
[context_name]hostname(config-aal2-node-aal2_node_name)#
A maximum of TBD AAL2 node can be configured in one ALCAP service.
Important:
The AAL2 Node configured here will be used to bind with ATM port in PVC Configuration sub-
mode of ATM Configuration mode for IuCS-over-ATM functionality.
Important:
For more information on AAL2 node configuration, refer AAL2 Node Configuration Mode
Commands.
Example
Following command creates AAL2 node configuration mode named
aal2_1
within the specific ALCAP
service for IuCS-over-ATM support towards CS core networks and switch the user to AAL2 Node
Configuration Mode named
Configuration Mode named
aal2_1
: