Cisco Cisco Packet Data Gateway (PDG)
APN Configuration Mode Commands
▀ cc-roaming
▄ Command Line Interface Reference, StarOS Release 16
1282
cc-roaming
Configures the roaming subscriber charging characteristics (CC) used by the GGSN when those from the SGSN will not
be accepted.
be accepted.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
cc-roaming { behavior bits | profile index }
default cc-roaming
default
Restores the cc-roaming parameter to its default setting of the following:
behavior bits: 0x00
profile index: 8
behavior
bits
Specifies the behavior bit for the roaming subscriber charging characteristic.
bits
can be configured to any
unique bit from 001H to FFFH (0001 to 1111 1111 1111 bin) where the least-significant bit corresponds to
B1 and the most-significant bit corresponds to B12.
B1 and the most-significant bit corresponds to B12.
profile
index
Specifies the profile index for the roaming subscriber charging characteristic.
index
can be configured to any
integer value between 0 and 15. Default: 8
Important:
3GPP standards suggest that profile index values of 1, 2, 4, and 8 be used for hot billing, flat rate
billing, prepaid billing and normal billing, respectively. A single charging characteristics profile can contain multiple
behavior settings.
behavior settings.
Usage
When the GGSN is configured to reject the charging characteristics sent by the SGSN for “roaming”
subscribers, it uses the profile index specified by this command to determine the appropriate CCs to use.
subscribers, it uses the profile index specified by this command to determine the appropriate CCs to use.