Cisco Cisco Packet Data Gateway (PDG)
ATM Port Configuration Mode Commands
threshold tx-utilization ▀
Command Line Interface Reference, StarOS Release 16 ▄
1555
threshold tx-utilization
Configures thresholds for transmit port utilization.
Product
HNB-GW
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > ATM Port Configuration
configure > port atm slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-port-slot_number/port_number)#
Syntax
threshold tx-utilization high_thresh [ clear low_thresh ]
default threshold tx-utilization
default
Restores the port tx-thresholds to their system defaults of 80 percent.
high_thresh
Default: 80
The high threshold transmit port utilization percentage that must be met or exceeded within the polling
interval to generate an alert or alarm.
The percentage can be configured to any integer value between 0 and 100.
The high threshold transmit port utilization percentage that must be met or exceeded within the polling
interval to generate an alert or alarm.
The percentage can be configured to any integer value between 0 and 100.
clear
low_thresh
Allows the configuration of the low threshold.
Default: 80
The low threshold transmit port utilization percentage that maintains a previously generated alarm condition.
If the utilization percentage falls below the low threshold within the polling interval, a clear alarm will be
generated.
The percentage can be configured to any integer value between 0 and 100.
Default: 80
The low threshold transmit port utilization percentage that maintains a previously generated alarm condition.
If the utilization percentage falls below the low threshold within the polling interval, a clear alarm will be
generated.
The percentage can be configured to any integer value between 0 and 100.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Transmit port utilization thresholds generate alerts or alarms based on the utilization percentage of each
configured port in relation to data transmitted during the specified polling interval. This threshold is
configured on a per-port basis.
configured port in relation to data transmitted during the specified polling interval. This threshold is
configured on a per-port basis.