Cisco Cisco Packet Data Gateway (PDG)
CSCF ISC Template Configuration Mode Commands
▀ filter-criteria
▄ Command Line Interface Reference, StarOS Release 16
3044
filter-criteria
Configure the filter criteria to be used by this template.
Product
SCM (S-CSCF)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF ISC Template Configuration
configure > context context_name > cscf isc-template id template_id
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-isc-tmpl)#
Syntax
[ no ] filter-criteria id criteria_id
no
Removes the specified filter criteria.
id
criteria_id
Specifies the ID of existing filter criteria to be used by this template. The particular criteria applied to a
subscriber will be based on the priority parameter.
subscriber will be based on the priority parameter.
criteria_id
must be an integer from 1 to 200.
Important:
Filter criteria can be assigned to more than one ISC template.
Usage
Use this command to configure the filter criteria to be used by this template.
Example
The following command identifies the filter criteria
1
:
filter-criteria id 1