Cisco Cisco Packet Data Gateway (PDG)
DHCP Client Profile Configuration Mode Commands
▀ client-identifier
▄ Command Line Interface Reference, StarOS Release 16
3338
client-identifier
Configures the client-identifier which is sent to the external DHCP server.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > DHCP Client Profile Configuration
configure > context context_name > dhcp-client-profile profile_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-dhcp-client-profile)#
Syntax
client-identifier { imsi | msisdn }
default dhcp client-identifier
default
Specifies that the subscriber’s IMSI be included in the client-identifier option of relevant DHCP messages.
imsi
Specifies that the subscriber’s IMSI be included in the client-identifier option of relevant DHCP messages.
Important:
The
imsi
option is not supported in this release.
msisdn
Specifies that the subscriber’s MSISDN be included in the client-identifier option of relevant DHCP
messages.
messages.
Usage
Use this command to configure which information is included in the DHCP client-identifier option of DHCP
messages to external DHCP servers.
messages to external DHCP servers.
Example
The following command specifies that a subscriber’s MSISDN be included in the DHCP client-identifier
option of DHCP messages to external DHCP servers:
option of DHCP messages to external DHCP servers:
client-identifier msisdn