Cisco Cisco Packet Data Gateway (PDG)
Diameter Endpoint Configuration Mode Commands
dynamic-route ▀
Command Line Interface Reference, StarOS Release 16 ▄
3429
dynamic-route
This command configures the expiration time for dynamic routes created after a Diameter destination host is reached.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Diameter Endpoint Configuration
configure > context context_name > diameter endpoint endpoint_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-diameter)#
Syntax
dynamic-route expiry-timeout value
default dynamic-route expiry-timeout
default
Configures this command with the default setting. Default: 86400 seconds (1 day)
value
Specifies the time (in seconds) that a dynamic route to a Diameter host will expire. The value must be an
integer from 1 through 86400000.
integer from 1 through 86400000.
Usage
Use this command to set expiration times for dynamic routes that are set up after a Diameter host has been
reached.
reached.
Example
The following command sets the dynamic route expiration to
43200
seconds:
dynamic-route expiry-timeout 43200