Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (D-S)
▀ disable radius
▄ Command Line Interface Reference, StarOS Release 16
3964
disable radius
Prevents the system from making requests of a selected RADIUS server.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
disable radius { [ charging ] [ accounting ] server ipv4/ipv6_address [ group group_name
| port port_number + ] }
| port port_number + ] }
[ charging ] [ accounting ]
Specifies the type of RADIUS server to disable.
accounting
: Specifies accounting servers
charging
: Specifies charging servers
charging accounting
: Specifies charging accounting servers
server ipv4/ipv6_address
Specifies the RADIUS server by IP address entered using IPv4 dotted-decimal or IPv6 colon-separated-
hexadecimal notation.
hexadecimal notation.
port port_number
Specifies the port number of the RADIUS server being disabled an integer from 0 through 65535. Default:
1812 (authentication) 1813 (accounting)
1812 (authentication) 1813 (accounting)
group group_name
Specifies the RADIUS group to which the server belongs as an alphanumeric string of 1 through 63
characters. Use this option in the event that the RADIUS server belongs to multiple groups and you only want
to disable the server within the specific group. Default: default
characters. Use this option in the event that the RADIUS server belongs to multiple groups and you only want
to disable the server within the specific group. Default: default
Usage
Use this command to gracefully stop the system from making requests of a specific RADIUS server.
Example
The following command disables a RADIUS accounting server with an IP address of
10.2.3.4
, the default
accounting server port number, and that resides in the
Group5
server group:
disable radius accounting server 10.2.3.4 group Group5