Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (A-C)
show active-charging fw-and-nat policy ▀
Command Line Interface Reference, StarOS Release 16 ▄
4207
show active-charging fw-and-nat policy
Displays Firewall-and-NAT Policy information.
Important:
This command is only available in StarOS 8.1, and in StarOS 9.0 and later. For more information on
this command please contact your local service representative.
Product
ACS
PSF
NAT
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show active-charging fw-and-nat policy { { { all | name fw_nat_policy_name } [ service
name acs_service_name ] } | { statistics { all | name fw_nat_policy_name } } } [ | { grep
grep_options | more } ]
name acs_service_name ] } | { statistics { all | name fw_nat_policy_name } } } [ | { grep
grep_options | more } ]
all
Displays information for all Firewall-and-NAT policies configured, optionally all in a specified service.
name fw_nat_policy_name
Displays detailed information for an existing Firewall-and-NAT policy specified as an alphanumeric string of
1 through 63 characters.
1 through 63 characters.
service name acs_service_name
Displays information for all or the specified Firewall-and-NAT policy in the specified ACS.
acs_service_name
must be the name of the active-charging service, and must be an alphanumeric string of
1 through 15 characters.
statistics
Displays statistics for all or the specified Firewall-and-NAT policy.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output will be sent.
For details on the usage of
the output will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.