Cisco Cisco Packet Data Gateway (PDG)
Gs Service Configuration Mode Commands
sgsn-number ▀
Command Line Interface Reference, StarOS Release 16 ▄
5935
sgsn-number
Define the SGSN’s E164 number to associate an SGSN with this Gs Service.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Gs Service Configuration
configure > context context_name > gs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gs-service)#
Syntax
sgsn-number E.164_number
E.164_number
Defines the SGSN’s ‘telephone’ number, the ISDN number for per ITU-T E.164 numbering plan. The
number must be a numerical string of 1 to 15 digits.
number must be a numerical string of 1 to 15 digits.
Usage
For releases 8.1 or higher, use this command to define the SGSN’s E.164 ISDN number. This value should
match the
match the
sgsn-number
defined for SGSN Service or GPRS Service.
Important:
Note: the Gs Service will not start unless the SGSN’s E.164 number is configured.
Example
sgsn-number 12345678901234