Cisco Cisco Packet Data Gateway (PDG)
Gs Service Configuration Mode Commands
▀ vlr
▄ Command Line Interface Reference, StarOS Release 16
5938
vlr
This command defines a VLR configuration for use with this Gs service.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Gs Service Configuration
configure > context context_name > gs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gs-service)#
Syntax
vlr vlr_name isdn-number E164_num [ bssap+ ssn ssn ] [ point-code pt_code ]
no vlr vlr_name
no
Removes the configured VLR from the Gs service.
vlr_name
Specifies the name of the VLR to configure in this Gs mode with ISDN number.
vlr_name
must be an alpha and/or numeric string of 1 to 63 characters.
isdn-number E164_num
Specifies the VLR number to configure with this command.
E164_num:
The ISDN number for the target VLR. Value must be defined according to the E.164 numbering
plan and must be a numeric string of 1 to 15 digits.
bssap+ ssn ssn
Specifies the subsystem number to configure with this VLR to use BSSAP+.
ssn:
Must be an integer from 1 through 255. Default value is 252.
point-code pt_code
Specifies SS7 address of VLR in point code value to this configured VLR name.
pt_code:
Must be in SS7 point code dotted-decimal ###.###.### format or decimal ######## format.
Usage
Use this command to define VLR configuration instances to be associated with the Gs service.
A maximum of 32 VLRs can be configured per Gs service.
A maximum of 32 VLRs can be configured per Gs service.
Example