Cisco Cisco Packet Data Gateway (PDG)
HNB-CS Network Configuration Mode Commands
▀ map idnns
▄ Command Line Interface Reference, StarOS Release 16
6224
map idnns
Configures the mapping of Intra-Domain NAS Node Selector (IDNNS) IE received from UE in RUA connect message
towards HNB-GW to MSC point code. This is an important configuration for CS network resource sharing over Iu-Flex
interface.
towards HNB-GW to MSC point code. This is an important configuration for CS network resource sharing over Iu-Flex
interface.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > HNB-CS Network Configuration
configure > cs-network cs_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-cs-network-instance_id)#
Syntax
map idnns range idnns_start to idnns_end point-code msc_point_code [ backup point-code
bkup_msc_point_code]
bkup_msc_point_code]
no map idnns range idnns_start to idnss_end
no
Removes the entries of mapping of range of IDNNS received from UE with particular MSC point code.
range idnns_start
to
idnns_end
Specifies the range of IDNNS received from the UE to map with a particular MSC point code during initial
CS core network node selection.
CS core network node selection.
idnns_start
is an integer from 0 through 1023 that should be less than
idnns_end
.
idnns_end
must be an integer from 0 through 1023 that should be more than
idnns_start
.
The command can be entered more than once to map multiple IDNNS ranges to the same MSC, but
overlapping and mapping of the same range to different MSC point codes is not allowed.
overlapping and mapping of the same range to different MSC point codes is not allowed.
point-code msc_point_code
Specifies the SS7 address of the MSC in the CS network to map with a range of IDNNS values.
msc_point_code
is an SS7 point code in dotted-decimal ###.###.### or 8-digit decimal ######## format.
backup point-code bkup_msc_point_code
Specifies the SS7 address of the MSC to be used as a backup in the CS network to map with a range of
IDNNS values.
IDNNS values.
bkup_msc_point_code
is an SS7 point code in dotted-decimal ###.###.### or 8-digit decimal ########
format.