Cisco Cisco Packet Data Gateway (PDG)
Link Configuration Mode Commands
mtp2-suerm-threshold ▀
Command Line Interface Reference, StarOS Release 16 ▄
6721
mtp2-suerm-threshold
Configure the signal unit error rate monitor (SUERM) threshold. This command is only available for lowspeed-
narrowband link-types.
narrowband link-types.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration > Linkset Configuration > Link Configuration
configure > ss7-routing-domain domain_id variant var_type > linkset id linkset_id > link
id link_id
id link_id
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-rd-linkset-linkset_id-link-link_id)#
Syntax
mtp2-suerm-threshold value
default mtp2-suerm-threshold
default
Resets the parameter to the default value.
value
Defines the threshold for number of bad frames
value
: Enter an integer from 64 to 1023. Default is 64.
Usage
Sets the threshold for link monitoring of bad frames.
Example
Set a new link monitoring bad frames (SEURM) threshold of 256:
mtp2-suerm-threshold 256