Cisco Cisco Packet Data Gateway (PDG)
MAP Service Configuration Mode Commands
application-context-name ▀
Command Line Interface Reference, StarOS Release 16 ▄
7009
application-context-name
Configure the operation timer(s) for one or more MAP application contexts.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > MAP Service Configuration
configure > context context_name > map-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-map-service-service_name)#
Syntax
application-context-name application operation-timer value
default application-context-name application operation-timer
default
Resets the operation timers for all applications to system defaults.
application
Select one of the following applications to enable the application:
authentication-failure-report
: Sets the reporting operation timer for authentication failure.
The setting range for this timer is 15 to 30 seconds and the default setting is 15 seconds.
cancel-location
: Sets the cancel location operation timer. The setting range for this timer is 15 to
30 seconds and the default setting is 15 seconds.
check-imei
: Sets the check-IMEI operation timer. The setting range for this timer is 15 to 30 seconds
for releases 8.0 and 8.1 and 1 to 30 seconds for releases 9.0 and higher. The default setting is 15
seconds.
seconds.
delete-subscriber-data
: Sets the delete subscriber data operation timer. The setting range for this
timer is 15 to 30 seconds and the default setting is 15 seconds.
mo-fwd-sm
: Sets the operation timer for fowarding mobile-originated SMS. The setting range for this
timer is 1 to 10 minutes and the default setting is 1 minute (60 seconds).
ms-purge
: Sets the operation timer for MS-purge function. The setting range for this timer is 15 to 30
seconds and the default setting is 15 seconds.
mt-fwd-sm
: Sets the operation timer for fowarding mobile-terminated SMS. The setting range for this
timer is 1 to 10 minutes and the default setting is 1 minute (60 seconds).
ready-for-sm
: Sets the operation timer for the ready for SMS operation. The setting range for this
timer is 15 to 30 seconds and the default setting is 15 seconds.
send-authentication-info
: Sets the operation timer for the sending authentication information
operation. The setting range for this timer is 15 to 30 seconds and the default setting is 15 seconds.