Cisco Cisco Packet Data Gateway (PDG)
MME Service Configuration Mode Commands
esm ▀
Command Line Interface Reference, StarOS Release 16 ▄
7083
esm
Defines the Evolved Session Management timer parameters like timeout durations for timers and retransmission counts
for the retransmission of Non-Access Stratum (NAS) messages in MME service.
for the retransmission of Non-Access Stratum (NAS) messages in MME service.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
esm { t3485-timeout t3485_dur | t3486-timeout t3486_dur | t3489-timeout t3489_dur |
t3495-timeout t3495_dur }
t3495-timeout t3495_dur }
default esm { t3485-timeout | t3486-timeout | t3489-timeout | t3495-timeout }
default
Resets the specified Evolved Session Management timer timeout to the system default value.
t3485-timeout t3485_dur
Sets the timeout duration (in seconds) for the T3485 timer. This timer is used by the default EPS bearer
context activation procedure.
This timer starts when the MME sends an ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST
message to UE and stops when receives ACTIVATE DEFAULT EPS BEARER CONTEXT ACCEPT or
ACTIVATE DEFAULT EPS BEARER CONTEXT REJECT message from UE.
context activation procedure.
This timer starts when the MME sends an ACTIVATE DEFAULT EPS BEARER CONTEXT REQUEST
message to UE and stops when receives ACTIVATE DEFAULT EPS BEARER CONTEXT ACCEPT or
ACTIVATE DEFAULT EPS BEARER CONTEXT REJECT message from UE.
t3485_dur
is an integer from 1 through 60. Default: 8
t3486-timeout t3486_dur
Sets the timeout duration (in seconds) for theT3486 timer. This timer is used by the default EPS bearer
context modification procedure.
This timer starts when the MME sends a MODIFY EPS BEARER CONTEXT REQUEST message to the UE
and stops when it receives a MODIFY EPS BEARER CONTEXT ACCEPT received or a MODIFY EPS
BEARER CONTEXT REJECT message from UE.
context modification procedure.
This timer starts when the MME sends a MODIFY EPS BEARER CONTEXT REQUEST message to the UE
and stops when it receives a MODIFY EPS BEARER CONTEXT ACCEPT received or a MODIFY EPS
BEARER CONTEXT REJECT message from UE.
t3485_dur
is an integer from 1 through 60. Default: 8
t3489-timeout t3489_dur
Sets the timeout duration (in seconds) for the T3489 timer. This timer is used for the default EPS bearer
context deactivation procedure.
This timer starts when the MME sends an ESM INFORMATION REQUEST message to the UE and stops
when receives a ESM INFORMATION RESPONSE message from the UE.
context deactivation procedure.
This timer starts when the MME sends an ESM INFORMATION REQUEST message to the UE and stops
when receives a ESM INFORMATION RESPONSE message from the UE.