Cisco Cisco Packet Data Gateway (PDG)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
OSPF VRF Configuration Mode Commands
ospf router-id ▀
Command Line Interface Reference, StarOS Release 16 ▄
7375
ospf router-id
Configures the router ID for the OSPF process.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > OSPF Configuration > OSPF VRF Configuration
configure > context context_name > router ospf > ip vrf vrf_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-ospf-vrf)#
Syntax
ospf router-id ip_address
no ospf router-id ip_address
no
Disables
ospf router-id
.
ip_address
Specifies the router ID for the OSPF process as an IP address entered using IPv4 dotted-decimal notation
Usage
Use this command to set the router ID for the current OSPF router process.
Example
The following command sets the router ID to
192.168.200.1
:
ospf router-id 192.168.200.1