Cisco Cisco Packet Data Gateway (PDG)
PCC-Sp-Endpoint Configuration Mode Commands
diameter origin end-point ▀
Command Line Interface Reference, StarOS Release 16 ▄
7611
diameter origin end-point
This command is used to bind/associate a pre-configured Diameter host/realm (SSC) over Sp interface for SPR
interactions with a PCC-Sp-Endpoint instance to be used for subscriber profile and policy management.
interactions with a PCC-Sp-Endpoint instance to be used for subscriber profile and policy management.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Sp Endpoint Configuration
configure > context context_name > pcc-sp-endpoint endpoint_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-spendpoint)#
Syntax
diameter origin endpoint ssc_node_name
no diameter origin endpoint
no
Removes the associated Diameter Origin Endpoint configuration from PCC-Sp-Endpoint instance configured
for IPCF configuration.
for IPCF configuration.
ssc_node_name
The
ssc_node_name
is a predefined Diameter origin endpoint node (SSC) and must be an alphanumerical
string from 1 through 63 characters.
Usage
Use this command to bind the SSC node over Sp interface by associating a pre-configured Diameter Origin
Endpoint configuration with a PCC-Sp-Endpoint instance.
The Diameter origin endpoint must be a pre-configured instance in the Context Configuration Mode. For
more information on Diameter origin endpoint configuration, refer Diameter Endpoint Configuration Mode
Commands chapter.
Endpoint configuration with a PCC-Sp-Endpoint instance.
The Diameter origin endpoint must be a pre-configured instance in the Context Configuration Mode. For
more information on Diameter origin endpoint configuration, refer Diameter Endpoint Configuration Mode
Commands chapter.
Example
Following command associates a pre-configured Diameter endpoint node configuration named
ssc_1
with a
PCC-Sp-Endpoint instance for subscriber policy profile management.
diameter origin endpoint ssc_1
Following command removes the pre-associated Diameter endpoint node configuration named
ssc_1
from a
PCC-Sp-Endpoint instance.
no diameter origin endpoint