Cisco Cisco Packet Data Gateway (PDG)
Policy Control Configuration Mode Commands
cc-profile ▀
Command Line Interface Reference, StarOS Release 16 ▄
7843
cc-profile
This command configures the value of the Offline AVP sent to the PCRF based on the Charging Characteristics (CC)
profile received from the SGSN.
profile received from the SGSN.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IMS Authorization Configuration > Policy Control
Configuration
Configuration
configure > context context_name > ims-auth-service service_name > policy-control
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-imsa-dpca)#
Syntax
cc-profile cc_profile_number [ to cc_profile_number_range_end ] map-to offline-avp { 0 |
1 }
1 }
{ default | no } cc-profile
default
Configures the default setting for this command.
Default: Deletes all previously configured mappings.
Default: Deletes all previously configured mappings.
no
Deletes all previously configured mappings.
cc_profile_number
Specifies the CC profile number to map.
For example, 1 for Hot Billing.
For example, 1 for Hot Billing.
cc_profile_number
must be an integer from 0 through 15.
cc_profile_number_range_end
Specifies, for a range of CC profile numbers to map, the end number. That is, from
cc_profile_number
through
cc_profile_number_range_end
.
cc_profile_number_range_end
must be an integer from 1 through 15.
map-to offline-avp { 0 | 1 }
Specifies to map the CC profile number(s) to the Offline AVP value sent to the PCRF.
0
: Corresponds to the value DISABLE_OFFLINE (0).
1
: Corresponds to the value ENABLE_OFFLINE (1).