Cisco Cisco Packet Data Gateway (PDG)
SGSN Global Configuration Mode Commands
common-ra-paging ▀
Command Line Interface Reference, StarOS Release 16 ▄
8247
common-ra-paging
This command enables paging across common Routing Area (RA) for 2G and 3G.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SGSN Global Configuration
configure > sgsn-global
Entering the above command sequence results in the following prompt:
[local]host_name(config-sgsn-global)#
Syntax
[ default | no ] common-ra-paging
default
Returns the SGSN to the default state: paging across commong Routing Area (RA) is disabled for 2G and 3G.
no
Disables paging across common Routing Area (RA) for 2G and 3G after it has been enabled using the
common-ra-paging
command
Usage
When this CLI is enabled, the SGSN supports paging initiation in both the RATs (2G and 3G) if paging has
to be done in RA which is common across the RATs. SGSN also accepts power-off detach from the MS,
which is different from the RAT when the MS is attached.
to be done in RA which is common across the RATs. SGSN also accepts power-off detach from the MS,
which is different from the RAT when the MS is attached.
Example
Use the following command to enable paging across common Routing Area (RA) for 2G and 3G.
common-ra-paging