Cisco Cisco Packet Data Interworking Function (PDIF)
APN Configuration Mode Commands
▀ egtp
▄ Command Line Interface Reference, StarOS Release 16
1310
egtp
Enables/disables the Overcharging Protection feature on an APN service.
Product
P-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
egtp overcharge-protection [ drop-all | transmit-all ]
{ default | no | remove } egtp overcharge-protection
default
Disables overcharging protection.
no
Disables overcharging protection.
remove
Removes overcharging protection configuration.
overcharge-protection [ drop-all | transmit-all ]
drop-all
: Configures overcharging protection to drop all packets received in LORC.
transmit-all
: Configures overcharging protection to send all packets received in LORC mode to S-GW.
Usage
Use this command to enable/disable the Overcharging Protection feature on an APN service.
When Overcharging Protection feature is configured at both P-GW service and APN, configuration at APN
takes priority.
When Overcharging Protection feature is configured at both P-GW service and APN, configuration at APN
takes priority.
Important:
Use of Overcharging Protection feature requires that a valid license key be installed. Contact your
Cisco account representative for information on how to obtain a license.
Example
The following command configures overcharging protection to drop all packets received in LORC”