Cisco Cisco Packet Data Interworking Function (PDIF)
APN Configuration Mode Commands
mobile-ip home-agent ▀
Command Line Interface Reference, StarOS Release 16 ▄
1369
mobile-ip home-agent
Configures the IP address of the home agent (HA) used by the current APN to facilitate subscriber Mobile IP sessions.
Product
GGSN
FA
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
mobile-ip home-agent ip_address [ alternate ]
no mobile-ip home-agent ip_address alternate
default mobile ip home-agent
default
Restores the APN mobile-ip parameters to the default setting, no HA address defined.
no
Removes a previously configured HA address.
ip_address
Specifies the IP address of the HA expressed in IPv4 dotted-decimal notation.
alternate
Designates this Mobile IP HA as the alternate that will be used in the event of a fail-over.
Usage
If the APN is configured to support Mobile IP for all PDP contexts it is facilitating, this command specifies
the IP address of the HA that is to be used.
the IP address of the HA that is to be used.
Example
The following command configures an HA IP address of 192.168.1.15:
mobile-ip home-agent 192.168.1.15