Cisco Cisco Packet Data Interworking Function (PDIF)
APN Configuration Mode Commands
▀ ppp
▄ Command Line Interface Reference, StarOS Release 16
1396
ppp
Configures the Point-to-Point Protocol (PPP) options for the current APN.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
ppp { data-compression { protocols protocols | mode modes } | keepalive seconds | min-
compression-size min_octets | mtu max_octets }
compression-size min_octets | mtu max_octets }
default ppp { data-compression protocols | keepalive | min-compression-size | mtu }
no ppp { data-compression protocols | keepalive seconds | mtu }
default
Configures the default PPP parameters for the specified APN.
no
Resets the option specified to its default setting.
data-compression {
mode
modes
| protocols
protocols}
Configures the data compression or the compression protocol to use for the APN. Default: all protocols
enabled
enabled
mode
modes
: Sets the compression mode to one of the following:
normal
: Packets are compressed using the packet history for automatic adjustment and for best
compression.
stateless
: Each packet is compressed individually.
protocols
protocols
: Sets the compression protocol to one of the following:
deflate
: DEFLATE algorithm
mppc
: Microsoft Point-to-Point Compression
stac
: STAC LZS algorithm