Cisco Cisco Packet Data Interworking Function (PDIF)
Command Line Interface Reference, StarOS Release 16 ▄
1449
Chapter 24
APN Profile Configuration Mode
The APN Profile configuration mode defines a set of parameters controlling the SGSN or MME behavior when a
specific APN is received or no APN is received in a Request. An APN profile is a key element in the Operator Policy
feature and an APN profile is not used or valid unless it is associated with an APN and this association is specified in an
operator policy (see the Operator Policy Configuration Mode Commands ).
specific APN is received or no APN is received in a Request. An APN profile is a key element in the Operator Policy
feature and an APN profile is not used or valid unless it is associated with an APN and this association is specified in an
operator policy (see the Operator Policy Configuration Mode Commands ).
Essentially, an APN profile is a template that consists of a set of APN-specific commands that may be applicable to one
or more APNs. When a subscriber requests an APN that has been identified in a selected operator policy, the set of
commands in the associated APN profile will be applied. The same APN profile can be associated with multiple APNs
and multiple operator policies.
or more APNs. When a subscriber requests an APN that has been identified in a selected operator policy, the set of
commands in the associated APN profile will be applied. The same APN profile can be associated with multiple APNs
and multiple operator policies.
The SGSN and the MME each support a total of 1,000 APN profile configurations per SGSN/MME; up to 50 APN
profiles can be associated with a single operator policy. For additional SGSN limit information, refer to Engineering
Rules in the SGSN Administration Guide.
profiles can be associated with a single operator policy. For additional SGSN limit information, refer to Engineering
Rules in the SGSN Administration Guide.
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Important:
The commands or keywords/variables that are available are dependent on platform type, product
version, and installed license(s).