Cisco Cisco Packet Data Interworking Function (PDIF)
BFD Configuration Mode Commands
slow-timers ▀
Command Line Interface Reference, StarOS Release 16 ▄
1567
slow-timers
Specifies the asynchronous mode control packet interval when Echo mode is enabled. In BFD asynchronous mode,
BFD-enabled peers periodically send BFD Control packets to one another. If a number of those packets in a row are not
received within the specified interval by the other peer, the session is declared to be down.
BFD-enabled peers periodically send BFD Control packets to one another. If a number of those packets in a row are not
received within the specified interval by the other peer, the session is declared to be down.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > BFD Configuration
configure > context context_name > bfd-protocol
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-bfd)#
Syntax
slow-timers timer-value
no slow-timers
no
Disables previously specified BFD slow timers.
timer-value
Specifies the BFD control packet interval (in milliseconds) for Echo mode as an integer from 1000 through
300000. Default: 2000
300000. Default: 2000
Usage
Use this command to configure the interval between BFD control packets sent between peers in Echo mode.
Example
slow-timers 10000