Cisco Cisco Packet Data Interworking Function (PDIF)
BGP Configuration Mode Commands
▀ redistribute
▄ Command Line Interface Reference, StarOS Release 16
1618
redistribute
Redistributes routes via BGP from another protocol to BGP neighbors.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > BGP Configuration
configure > context context_name > router bgp as_number
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-bgp)#
Syntax
[ no ] redistribute { connected | ospf | rip | static } [ route-map map_name ]
no
Remove the specified redistribution parameters from the BGP router configuration.
redistribute connected
Specifies that connected routes will be redistributed.
redistribute ospf
Specifies that Open Shortest Path First (OSPF) routes will be redistributed
redistribute rip
Specifies that Routing Information Protocol (RIP) routes will be redistributed. (RIP is not supported at this
time.)
time.)
redistribute static
Specifies that static routes will be redistributed.
[ route-map
map_name ]
Filter routes through the specified route map before redistribution. map_name specifies the name of the route-
map to use and must be specified as an alphanumeric string of 1 through 79 characters.
map to use and must be specified as an alphanumeric string of 1 through 79 characters.
Usage
Use this command to specify what routes this BGP router should redistribute into BGP.
Example
The following command redistributes OSPF routes after filtering them through the route map named
Map1
:
redistribute ospf route-map Map1