Cisco Cisco Packet Data Interworking Function (PDIF)
Bulk Statistics Configuration Mode Commands
▀ sample-interval
▄ Command Line Interface Reference, StarOS Release 16
1806
sample-interval
Configures the time interval between collecting local statistics.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Bulk Statistics Configuration
configure > bulkstats mode
Entering the above command sequence results in the following prompt:
[local]host_name(config-bulkstats)#
Syntax
sample-interval minutes
minutes
Specifies the frequency (in minutes) of polling for local statistics as an integer from 1 through 1440.
Usage
Adjust the sampling interval to tune the system response as shorter periods can cause undue system overhead
whereas longer periods have less of a statistical importance when analyzing data.
The system is shipped from the factory with the sampling interval set to 15 minutes.
whereas longer periods have less of a statistical importance when analyzing data.
The system is shipped from the factory with the sampling interval set to 15 minutes.
Example
sample-interval 120