Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
▀ accounting mode
▄ Command Line Interface Reference, StarOS Release 16
1844
accounting mode
Configures the mode to be used for accounting – GTPP (default), RADIUS/Diameter or None.
Product
S-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
accounting mode { gtpp | none | radius-diameter }
remove accounting mode
remove
Removes the accounting mode.
gtpp
Specifies that GTPP accounting is performed. This is the default method.
none
Specifies that no accounting will be performed for the call control profile.
radius-diameter
Specifies that RADIUS/Diameter will be performed for the call control profile.
Usage
Use this command to specify the accounting mode for a call control profile. For additional information on
accounting mode and its relationship to operator policy, refer to the System Administration Guide.
accounting mode and its relationship to operator policy, refer to the System Administration Guide.
Example
The following command specifies that RADIUS/Diameter accounting will be used for the call control profile:
accounting mode radius-diameter