Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
local-cause-code-mapping hss-unavailable ▀
Command Line Interface Reference, StarOS Release 16 ▄
1935
local-cause-code-mapping hss-unavailable
Configures the reject cause code to send to a UE when the HSS does not respond.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
local-cause-code-mapping hss-unavailable emm-cause-code { eps-service-not-allowed-in-
this-plmn | network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
this-plmn | network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
remove local-cause-code-mapping hss-unavailable
remove local-cause-code-mapping hss-unavailable
Removes the configured cause code mapping.
hss-unavailable emm-cause-code { eps-service-not-allowed-in-this-plmn | network-
failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-
allowed-in-this-tracking-area | tracking-area-not-allowed }
failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-
allowed-in-this-tracking-area | tracking-area-not-allowed }
Specifies the EPS Mobility Management (EMM) cause code to return when the HSS does not respond.
eps-service-not-allowed-in-this-plmn
network-failure
no-suitable-cell-in-tracking-area
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
tracking-area-not-allowed
Usage
Use this command to configure the cause code returned to a UE when the HSS is unavailable. By default, the
MME sends the UE the #17 - Network failure cause code when encountering this condition.
This condition is detected in the following cases:
MME sends the UE the #17 - Network failure cause code when encountering this condition.
This condition is detected in the following cases:
HSS resolution fails in the MME.
HSS does not respond in time.