Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
▀ location-area-list
▄ Command Line Interface Reference, StarOS Release 16
1954
location-area-list
Defines the location area list to allow or restrict services in the specified location areas identified by location area code
(LAC).
(LAC).
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
location-area-list instance instance area-code area_code [ area_code * ]
no location-area-list instance instance[ area-code area_code ]
no
If the
area-code
keyword is included in the command, then only the specified area code is removed from
the identified list. If the
area-code
keyword is not included with the command, the entire list of LACs is
removed from this call control profile.
instance instance
Specifies an identification for the specific location area list.
instance
must be an integer between 1 and 5.
area-code area_code *
This keyword defines the location area codes (LACs) to be used by this call control profile as a determining
factor in the handling of incoming calls. Multiple LACs can be defined in a single location-area-list.
factor in the handling of incoming calls. Multiple LACs can be defined in a single location-area-list.
area_code
: Enter an integer between 1 and 65535.
*
If desired, enter multiple LACs separated by a single blank space.
Usage
Use the command multiple times to configure multiple LAC lists or to modify the a list.
Example
The following command creates a location area list for a single area code:
location-area-list instance 1 area-code 514
This command creates a second location area list for with multiple area codes - all separated by a single blank
space:
space:
location-area-list instance 2 area-code 514 62552 32 1513