Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
rfsp-override ▀
Command Line Interface Reference, StarOS Release 16 ▄
2007
rfsp-override
Configures RAT frequency selection priority override parameters for this call control profile.
Product
MME
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
rfsp-override { default value | eutran-ho-restricted value | ue-val value new-val value +
}
}
remove rfsp-override { default | eutran-ho-restricted | ue-val value }
remove
Deletes the rfsp-override configuration from the call control profile.
default
Restores the default value assigned.
eutran-ho-restricted
value
This keyword is used to configure the value for RAT frequency selection priority when Handover to EUTRAN is
restricted. This value overrides the RFSP ID value sent by the HLR/HSS in an EPS subscription.
restricted. This value overrides the RFSP ID value sent by the HLR/HSS in an EPS subscription.
value
: Enter an integer from 1 to 256.
ue-val value
Assign the UE value for the RAT frequency selection priority.
value
: Enter an integer from 1 to 256.
new-val value
Assign a new RFSP Index value.
value
: Enter an integer from 1 to 256.
Multiple UE value/new value combinations can be configured in a single command.
Usage
Use this command to configure the RAT frequency selection priority override parameter.
Multiple UE value/new value combinations can be configured.
Multiple UE value/new value combinations can be configured.