Cisco Cisco Packet Data Interworking Function (PDIF)
CGW Service Configuration Mode Commands
▀ revocation
▄ Command Line Interface Reference, StarOS Release 16
2168
revocation
Configures Binding Revocation support for specific CGW service.
Product
SaMOG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > CGW Configuration
configure > context context_name > cgw-service cgw_service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cgw-service)#
Syntax
revocation { enable | max-retransmission max_retransmission | retransmission-timeout
msecs }
msecs }
default revocation { enable | max-retransmission | retransmission-timeout }
no revocation enable
default reg-lifetime
default
Resets the revocation to its default value.
no
Disables revocation.
revocation { enable |
max-retransmission
max_retransmission
| retransmission-
timeout
msecs
}
enable
: Enables the Binding Revocation Support. Default is disabled.
max-retransmission
max_retransmission
: Configures the maximum number of
retransmissions,
max_retransmission
an integer between
0
and
10
.
retransmission-timeout
msecs
: Configures the retransmission timeout in milli seconds,
msecs
an
integer between
500
and
10000
.
Usage
Use this command to configure Binding Revocation support for specific CGW service.
Example
The following command configures the retransmission timeout to 1000 milli seconds.
revocation retransmission-timeout 1000