Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands E-H
▀ ggsn-service
▄ Command Line Interface Reference, StarOS Release 16
2360
ggsn-service
Creates or deletes a Gateway GPRS Support Node (GGSN) service and enters the GGSN Service Configuration Mode
within the current context to configure it.
within the current context to configure it.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
ggsn-service svc_name [ -noconfirm ]
no ggsn-service svc_name
no
Deletes a preciously configured GGSN service.
svc_name
Specifies the name of the GGSN service to create/configure as an alphanumeric string of 1 through 63
characters that is case sensitive.
characters that is case sensitive.
Important:
Service names must be unique across all contexts within a chassis.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
Usage
Services are configured within a context and enable certain functionality. This command creates and allows
the configuration of services enabling the system to function as a GGSN in a GPRS or UMTS network. This
command is also used to remove previously configured GGSN services.
A maximum of 256 services (regardless of type) can be configured per system.
the configuration of services enabling the system to function as a GGSN in a GPRS or UMTS network. This
command is also used to remove previously configured GGSN services.
A maximum of 256 services (regardless of type) can be configured per system.
Caution:
Large numbers of services greatly increase the complexity of management and may impact overall
system performance (i.e. resulting from such things as system handoffs). Therefore, it is recommended that a large
number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
Example