Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands E-H
gtpp max-retries ▀
Command Line Interface Reference, StarOS Release 16 ▄
2403
gtpp max-retries
Configures the maximum number of times the system attempts to communicate with an unresponsive Charging
Gateway Function (CGF).
Gateway Function (CGF).
Product
GGSN
P-GW
SAEGW
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
gtpp max-retries max_attempts
default gtpp max-retries
default
Configures this command with the default setting.
Default: 4
Default: 4
max_attempts
Specifies the number of times the system attempts to communicate with a CGF that is not responding.
max_attempts
is an integer from 1 through 15.
Usage
This command works in conjunction with the
gtpp detect-dead-server
and
gtpp timeout
parameters
to set a limit to the number of communication failures that can occur with a configured CGF.
When the value specified by this parameter is met, a failure is logged. The gtpp detect-dead-server parameter
specifies the number of consecutive failures that could occur before the server is marked as down.
In addition, the gtpp timeout command controls the amount of time between re-tries.
If the value for the max-retries is met, the system begins storing CDRs in Random Access Memory (RAM).
The system allocates memory as a buffer, enough to store one million CDRs for a fully loaded chassis (a
maximum of one outstanding CDR per PDP context). Archived CDRs are re-transmitted to the CGF until
they are acknowledged or the system’s memory buffer is exceeded.
Refer to the
When the value specified by this parameter is met, a failure is logged. The gtpp detect-dead-server parameter
specifies the number of consecutive failures that could occur before the server is marked as down.
In addition, the gtpp timeout command controls the amount of time between re-tries.
If the value for the max-retries is met, the system begins storing CDRs in Random Access Memory (RAM).
The system allocates memory as a buffer, enough to store one million CDRs for a fully loaded chassis (a
maximum of one outstanding CDR per PDP context). Archived CDRs are re-transmitted to the CGF until
they are acknowledged or the system’s memory buffer is exceeded.
Refer to the
gtpp detect-dead-server
and
gtpp timeout
commands for additional information.
Example
The following command configures the maximum number of re-tries to be
8
: